Filter
Top Products
172
Chapter 10 Various Settings
Chapter 10
*
Never turn off the power while the display indicates
<Executing...>. Doing so will damage the KR’s
internal memory, making it unusable.
■
Restoring the Factory Settings
(Factory Reset)
You can return the content stored with “Memory Backup” (p.
171) and the User Programs (p. 129) to their original factory
settings. This operation is referred to as “Factory Reset.”
* When you perform a Factory Reset, all settings that have been
stored in memory up to then are erased and reset to their
factory defaults.
→
This operation does not return the touch screen calibration
settings to the original factory condition. To return the touch
screen calibration settings to the original factory settings, refer
to “Returning the Touch Screen Calibration Settings to the
Original Factory Settings” (p. 175)
→
When you want to restore the content registered to the KR’s
User memory to the factory condition, refer to “Formatting the
User Memory” (p. 180).
At step 3 in “Procedure” (p. 165), touch “Factory Reset.”
A screen like the one shown below appears.
fig.d-factory.eps_50
Touch <Execute>.
The confirmation message appears on screen.
Touch <OK> to restore the original factory settings.
When you have finished making the settings, switch off the
power, then switch it back on again.
When you touch <Cancel>, the settings are left untouched,
and you’re returned to the previous screen.
*
Never turn off the power while the display indicates
<Executing...>. Doing so will damage the KR’s
internal memory, making it unusable.
■
Changing the Functions of the
Remote Control’s Buttons
You can change the functions assigned to the remote
control’s buttons.
At step 3 in “Procedure” (p. 165), touch <Remote Control>.
A screen like the one shown below appears.
Switching ON/OFF of the Remote Control
1.
Touch <ON/OFF> to switch On/Off of the
remote control.
2.
Press the [Exit] button to return to the Functions screen.
Changing the [FUNC1] [FUNC2] Button
Functions
1.
Touch <FUNC1> <FUNC2> to assign
functions to [FUNC1] [FUNC2] button.
Display
Explanation
Off
Not received.
On
Received.
Display
Explanation
Moving Key
Each time the [FUNC1] or [FUNC 2]
button is pressed, the piano player
function is switched on or off.
Lyric Color
Each time the [FUNC 1] or [FUNC 2]
button is pressed, switch the color used for
lyric in the external display.
Replay
Pressing the button while the song is
playing back stops the playback. When
you release the button, playback resumes
from the beginning of the measure being
played when you pressed the button.
Pressing the button a number of times in
rapid succession moves the playback
position back by the same the number of
measures, after which playback resumes.
KR117_r_e.book 172 ページ ２００５年１１月８日 火曜日 午後４時２０分