Filter
Top Products
151
Chapter 8 Creating and Editing Songs
Chapter 8
5.
Touch <Execute>.
The beat change starts with the measure you selected.
Repeat Steps 3–5 to make beat settings in other measures
as needed.
Recording the Performance
6.
Press the [Exit] button twice.
The screen displayed before you pressed the [Menu]
button appears.
7.
Press the [ (Reset)] button to return the measure
number to “1.”
8.
Start a recording.
Record the performance using the procedures described
in “Chapter 5 Recording and Saving the Performance”
(p. 104). Specify the measure, then change the beat.
Changing the Tempo of
Recorded Songs
You can change the basic tempo of a composition. The basic
tempo was initially set when the song was recorded.
1.
Press the Tempo [-] and [+] buttons to choose a tempo.
2.
Hold down the [ (Rec)] button and press the
[ (Reset)] button.
The song’s basic tempo changes.
The change in basic tempo is discarded when you turn
off the power or choose a different song. Save important
song data to external memory or to user memory (p.
116).
* If the song you’re working on has tempo changes, press the
[ (Reset)] button to go back to the beginning of the song
before you carry out this operation.
Changing the Tempo Within
the Song
You can add tempo changes to a recorded composition.
The KR stores song tempo information and performance data
separately. Therefore, when making changes to the tempo in
a song, you must record the changes in the tempo
information independently of the performance data.
This recording of the tempo is called “Tempo Recording.”
■
Adjusting the Tempo While
Listening to a Song
You can add ritardando and other such gradual tempo
changes.
Setting the Rec Mode to “Tempo”
1.
Press the [Menu] button.
The “Composer Menu” or the “A/V Sync” screen
appears.
2.
Touch <Rec Mode>.
A screen like the one shown below appears.
fig.d-rec-tempo.eps_50
3.
Touch the <Rec Mode> to select <Tempo>.
This makes the setting for tempo recording.
Press the [Exit] button a number of times to switch to the
screen where the measure number is indicated in the
upper right of the screen.
When the KR goes into Tempo Recording, the tempo
indication is highlighted.
Recording the Tempo
4.
Use the [ (Bwd)] and [ (Fwd)] buttons to
move slightly before the measure where you want to
change the tempo.
5.
Press the [ (Rec)] button and watch the indicator is
flashing.
The KR is put in recording standby.
KR117_r_e.book 151 ページ ２００５年１１月８日 火曜日 午後４時２０分