Filter
Top Products
115
Connection and MIDI data flow
When using a USB connection
fig.connect-usb
* If V-LINK is ON, PCR 1 and PCR 2 messages will be sent both to USB and to the MIDI connector.
* For an explanation of the items in the diagram, refer to “About the ports when using a USB
connection” (p. 159).
USB cable
AC adaptor
Roland
DP-2 (sold separately)
It is not necessary to connect the
AC adaptor if you are using a USB
connection. However, with some
computers, the PCR-30/50 may
not operate when powered from
the USB bus. In this case, set the
power switch to the DC position
and connect the AC adaptor.
EV-5 (sold separately)
PCR-30/50/80PC
USB
EDIROL PCR
EDIROL PCR MIDI OUT
EDIROL PCR 2
EDIROL PCR 1
EDIROL PCR MIDI IN
MIDI OUT
MIDI IN
MIDI OUT
MIDI IN
PCR-30/50/80PC
USB
EDIROL PCR
EDIROL PCR MIDI OUT
EDIROL PCR 2
EDIROL PCR 1 PORT 1
EDIROL PCR MIDI IN
V-LINK OFF
V-LINK ON
PORT 1
PORT 2 /
PORT 2 /
MIDI OUT DEVICE
MIDI IN DEVICE
BULK
RECEPTION
MIDI OUT DEVICE
MIDI IN DEVICE
BULK RECEPTION
BULK TRANSMISSION
BULK TRANSMISSION