Filter
Top Products
156
Edit mode (EDIT)
■ Setting method D
Perform steps 1–3.
4
Use the [DEC][INC] buttons or the [0] or [1] keys to specify the USB DRIVER MODE.
* FPT = Fast Processing Technology for MIDI Transmission:
Effective use is made of the USB bandwidth according to the amount of MIDI data to be
transmitted, ensuring that MIDI data processing will always occur optimally.
5
Press the [ENTER] button.
■ Setting method E
Perform steps 1–3.
4
Use the [DEC][INC] buttons or the [0] or [1] keys to specify the GM2/LAST ACCESS
MEMORY setting.
5
Press the [ENTER] button.
■ Setting method F
Perform steps 1–3.
4
The display will indicate “RST”.
5
Press the [ENTER] button.
6
The display will blink “YES”.
7
Press the [ENTER] button.
0 Original driver
FPT technology is used to perform high-speed
MIDI transfer. Normally, we recommend that
you use this mode.
1 Generic driver
Select this if you are using the standard MIDI
driver provided by your operating system.
0 GM2 MEMORY
When the PCR starts up, memory number 0 (GM2) will
be loaded into current memory (p. 148) regardless of the
state in which the power was turned off.
1
LAST ACCESS
MEMORY
Upon power-up, the PCR-30/50/80 will recall the
memory that was last recalled or saved into current
memory (p. 148) .