Filter
Top Products
149
Edit mode (EDIT)
OMNI
If you turn the Omni setting ON, all messages will be transmitted on the current channel (p. 118)
regardless of the channel that is specified for each controller.
Also, all messages will be transmitted to the “KEYBOARD PORT SET” (p. 154) regardless of
the port that is specified for each controller.
fig.edt
1
Press the [EDIT] button.
The display will indicate “EDT”.
2
Press the [OMNI] key.
fig.omn
The display will blink “OMN”.
3
Confirm what’s indicated and press the [ENTER] button.
4
The display will show the current setting.
5
Use the [DEC] [INC] buttons or the [0] [1] keys to select the mode.
6
Press the [ENTER] button.
0 OMNI OFF
Messages will be transmitted on the channel and port
specified for each controller.
1 OMNI ON
Messages will be transmitted on the current channel
from the Keyboard Port, regardless of the channel
and port specified for each controller.