Filter
Top Products
67
Chapter 6. Changing the system settings
Chapter 6
■ Selecting the function of the SYNTH VOL knob
1. Make sure you’re in Play page.
If you’re not in Play page, press [EXIT] several times.
2. Press [F4] (GK FUNC).
3. Press [F6] (SYNTH VOL).
fig.6-32
4. Rotate [VALUE] to select the function of the SYNTH
VOL (GK Volume) knob.
ASSIGNABLE: The function can be set for each patch as
a parameter control knob. Depending on the parameter
that is assigned, the GK-2A/GK-3 select switch may not
function.
PICKUP LEVEL: Alters the position of the pickup used
in the COSM GUITAR block.
MIXER LEVEL: Controls the mixer level of the COSM
GUITAR.
* When set to anything other than “ASSIGNABLE,” the
PEDAL/ASSIGN SYNTH VOL settings are disabled.
MASTER LEVEL: Controls the MASTER LEVEL.
5. Press [EXIT] several times to return to the Play page.
If the function of the SYNTH VOL knob is set to anything
other than “PICKUP LEVEL” or “MASTER LEVEL,” the
select switch of the GK-2A/GK-3 cannot be used.
Rearranging the order of patches
* It is not possible to rearrange the preset patches.
1. Make sure you’re in Play page.
If you’re not in Play page, press [EXIT] several times.
2. Press [F6] (SYSTEM).
3. Press [F6] (EXCHANGE).
fig.3-03
4. Use [F1] to move the cursor to “PATCH A.”
5. Rotate [VALUE] to select one of the patches you wish to
exchange.
6. Use [F4] to move the cursor to “PATCH B.”
7. Rotate [VALUE] to select the other patch you wish to
exchange.
8. After specifying the two patches, press [F1]
(EXCHANGE).
The patches will be exchanged.
9. Press [EXIT] several times to return to the Play page.