Filter
Top Products
104
Error Messages
Indication:
Situation: Action:
01
You can only read the music file.
You can only read the music file. It
can not be saved.
–
02
An error occurred during writing.
An error occurred during writing. The external media may not yet be initialized (p. 95).
10
No storage media is inserted.
No external media is inserted. Insert the external media and try again.
11
Insufficient free memory at the
save destination.
There is not enough free memory
in the save destination.
Either use different external media, or delete unneeded files before you try
the operation again.
14
An error occurred during reading.
An error occurred during reading.
The external media may be
corrupted.
–
15
The data format is not compatible
with this instrument.
The file is unreadable. The data
format is not compatible with the
V-Piano.
Only files in the following formats can be used.
• Setup files with an extension of “vsu”
• SMF music files with an extension of “mid”
• Audio files with an extension of “wav” or “mp3”
For details on audio file formats, refer to “Types of audio data that
the V-Piano can play” (p. 75).
16
Data could not be read fast enough
for playback of the song.
Data was not called up in time for
playback of the song.
You may be able to play the song after waiting a few seconds.
18
The audio data format is not
compatible with this instrument.
The audio data format is not
compatible with this instrument.
Use audio files of a format that meets the requirements given in “Types of
audio data that the V-Piano can play” (p. 75).
30
The internal memory capacity of
the V-Piano is full.
The internal memory capacity of
the V-Piano is full.
–
40
The instrument can’t deal with the
excessive MIDI data.
The V-Piano cannot deal with the
excessive MIDI data sent from the
external MIDI device.
Reduce the amount of MIDI data sent to the V-Piano.
41
A MIDI cable has been
disconnected.
A MIDI cable has been
disconnected.
Connect it properly and securely.
43
A MIDI transmission error has
occurred.
A MIDI transmission error has
occurred.
Check the MIDI cable and connected MIDI device.
51
System error. Repeat procedure, or
power off, then on.
There may be a problem with the
system.
Repeat the procedure from the beginning. If it is not solved after you have
tried several times, contact a Roland service center.
65
The USB Memory port was
subjected to excessive current.
The USB memory connector was
subjected to excessive current.
Make sure that there is no problem with the USB memory, then turn the
power off, then on again.
V-Piano_e.book 104 ページ ２００９年１月２８日 水曜日 午前９時１０分