Filter
Top Products
41
Playing
The “Transpose” function lets you change the pitch without changing your keyboard fingering.
This is convenient when you need to play in a different key in order to match the range of a vocalist, or when playing from notation
that was written for a transposing instrument such as a trumpet.
The transposition range is from -1 octaves (-12 semitones) to +1 octaves (+12 semitones) in semitone steps.
fig.trans-1.eps
If the transposition setting causes any keys to exceed the range of A0–C8, those keys may sound one octave higher (or lower).
The MIDI OUT connector and USB MIDI connector will transmit note messages as transposed by this setting.
Note messages received via the MIDI IN connector or USB MIDI connector will not be transposed.
1.
While holding down the [TRANSPOSE] button, press a key.
fig.trans-2.eps
For example, if you want the “E” pitch to sound when you play the “C” key, hold down the [TRANSPOSE] button and press the E4 key.
This specifies a transpose setting of “+4.”
fig.trans-3.eps
The previous screen will reappear when you release the [TRANSPOSE] button.
If you’ve specified a transposition, the Transpose function will be on and the [TRANSPOSE] button will light. If the transposition
amount is “0,” the indicator will not light even if you press the [TRANSPOSE] button.
You can also change the amount of transposition by turning the [VALUE] dial.
2.
To turn off the Transpose function, press the [TRANSPOSE] button so it's indicator goes out.
The next time you press the [TRANSPOSE] button, the pitch will be transposed by the amount you specified.
Shifting the pitch (Transpose)
C4
Amount of transposition
V-Piano_e.book 41 ページ ２００９年１月２８日 水曜日 午前９時１０分