Filter
Top Products
22
Getting ready
Once the connections have been completed (p. 18), turn on power to your various devices in the order specified. By turning on
devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
1.
Before you turn on the power, use the [VOLUME] Knob to minimize the volume.
Also, completely turn down the volume of any connected audio device and other equipment.
2.
Press the upper portion of the [POWER] switch on the back of the V-Piano to turn on the power.
The unit is powered up, and the display’s backlighting comes on.
Always make sure to have the volume level turned down before switching on power. Even with the volume all the way down,
you may still hear some sound when the power is switched on, but this is normal, and does not indicate a malfunction.
Due to a circuitry protection feature, this instrument requires a few moments after it has been turned on before it is ready for
normal operation.
In the unlikely event the power is turned off or cut off while Factory Reset (p. 99) is in progress, the data may become corrupted,
and it may require additional time for the unit to start up the next time.
3.
Turn on the power to connected external devices.
4.
Adjust the volume of the connected external devices.
5.
Adjust the V-Piano’s volume to obtain the proper volume level.
Turning the power on and off
Turning on the power
V-Piano_e.book 22 ページ ２００９年１月２８日 水曜日 午前９時１０分