Filter
Top Products
89
Detailed settings for various functions (Utility screen)
Here’s how to load a previously saved setup file.
When you load a setup file, the V-Piano’s user setups and user tones will be overwritten and lost.
If there are important settings that you want to keep, save them to memory before you proceed.
1.
In the File screen, turn the [VALUE] dial to select “Load SETUP File,” and then press the [ENTER] button or the [F1
(ENTER)] button.
fig.UtilFileLoad01.eps
2.
Press the [F1 (MEDIA)] button to specify the media that contains the setup file that was saved.
3.
Turn the [VALUE] dial to select the setup file that you want to load.
fig.UtilFileLoad02.eps
4.
If you also want to load the system setting parameters from the file, press the [F2 (System)] button.
A symbol will appear in the screen.
5.
To load the file, press the [F4 (EXECUTE)] button.
6.
A confirmation message will appear. To load the file, press the [F4 (OK)] button.
If you decide to cancel without loading, press the [F1 (CANCEL)] button.
fig.UtilFileLoad02.eps
Never turn off the power while a file is being loaded.
Files whose name includes characters that cannot be displayed by the V-Piano are shown as “?”.
7.
When the file has been loaded, press the [EXIT] button to return to the previous screen.
Loading a setup file (Load SETUP File)
Value
Media
INT
V-Piano’s internal memory
USB USB memory connected to the USB memory connector
V-Piano_e.book 89 ページ ２００９年１月２８日 水曜日 午前９時１０分