Filter
Top Products
40
Playing
Ambience settings are saved in system memory.
You can also store the ambience settings in a setup. Refer to Ambience Mode in “Ambience settings (6. Ambience)” (p. 86).
If you’ve chosen to store the ambience settings in each setup, the ambience settings will also be stored when you store the
setup (p. 60).
1.
From the Tone screen, press the [FUNCTION] button to turn Function on.
The [FUNCTION] button will light.
2.
Press the [F4 (UTILITY)] button.
3.
Use the [F3 (
▲
)] or [F4 (
▼
)] buttons to select “1. System.”
fig.Util02.eps
4.
Press the [ENTER] button or the [F1 (ENTER)] button to access the system setting screen.
5.
Press the [WRITE] button.
fig.Util-3.eps
6.
A confirmation message will appear. To save the ambience settings, press the [F4 (OK)] button.
The ambience settings, as well as any system parameters you’ve edited will be saved in System memory.
If you decide to cancel without saving, press the [F1 (CANCEL)] button.
Saving the ambience settings
V-Piano_e.book 40 ページ ２００９年１月２８日 水曜日 午前９時１０分