Filter
Top Products
■ Inserting an effect
When you wish to use an effect such as compressor or distortion which modifies the direct sound
itself, insert the effect between the equalizer and the fader. When an effect is inserted into one of
the channels, that effect will be unavailable for use by other channels. For example if you insert
EFFECT-1 into channel 1, it will not be possible for other channels to use EFFECT-1.
* If you insert different effects in each channel, or mix a channel in which effects are inserted with
a channel in which effects are not inserted, time differences may occur depending on the type of
effect, and the result may not always be as you expect.
1. Press [CH EDIT] for the channel to which you wish to apply the effect.
2. Hold down [SHIFT] and press channel 7 [EFFECT-1(CH EDIT)].
3. Rotate the TIME/VALUE dial.
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIMETIME
48
24
4
0
dB
1122
EQ Fader
Post
Pre
Off
Post
Pre
Off
Post
Pre
Off
Post
Pre
Off
Insert
Insert
Level
Level
Pan
Pan
Pan
Pan
EFFECT 1
EFFECT 2
EFFECT 2 buss
EFFECT 1 buss
AUX buss
MIX buss
Channel 1
Level
AUX SEND (A, B)
MASTER OUT (L, R)
MIX buss or
AUX buss
EFFECT 1
cannot be used
Chapter 1 Trying out the expanded functions
34