Filter
Top Products
1. Select one of the V-tracks that you wish to exchange,
and prepare that data for playback.
2. Press [TRACK], select “TRK Track Exchange?”, and
press [YES]. The display will let you select the
exchange source track and the exchange destination
track and V-track.
3. Use [SEL (CH EDIT)] to select the exchange source
track. When you select the exchange source track, the
V-track selected for that channel will be selected as the
exchange source V-track. Next, press CURSOR [ ] to
make the exchange destination blink, use [SEL (CH
EDIT)] to select the exchange destination track, and
use the TIME/VALUE dial to select the exchange desti-
nation V-track.
If you wish to execute the Track Exchange operation
with the same settings for other tracks as well, select the
exchange source and exchange destination tracks, and
then press CURSOR [ ] once again. You will be able
to specify a new set of tracks to be exchanged. In this
case, it is not possible to set the exchange destination
track to a track that was already specified as an
exchange source track.
If you wish to cancel the exchange operation for certain
tracks, use PARAMETER [ ][ ] to display the set-
tings for those tracks, and press [CANCEL (NO)] twice.
4. Execute the track exchange operation.
Inserting blank space into a
performance (Insert)
This operation inserts blank space at the specified location.
When you wish to add a phrase into the playback data, you
can insert a blank of the appropriate length, and then record
the phrase into the blank area.
* Do not leave sound within 0.5 seconds before or after the
area into which the data will be inserted. Any sound
which was within 0.5 seconds of the inserted data will not
playback.
1. Press [TRACK], select “TRK Insert?”, and press [YES].
The display will let you select the track and V-track into
which the blank will be inserted.
2. Use [SEL (CH EDIT)] to select the insert destination
track, and use the TIME/VALUE dial to select the insert
destination V-track.
If you wish to execute the Track Insert operation with
the same settings for other tracks as well, press [SEL (CH
EDIT)] for the additional tracks that you wish to insert,
and use the TIME/VALUE dial to specify the insert des-
tination V-track. If you wish to cancel the insert opera-
tion for a track, use PARAMETER [ ][ ] to dis-
play the setting of that track, and press [CANCEL (NO)].
If you wish to insert a blank into all V-tracks of the
specified track, use the TIME/VALUE dial to select
ÒÓ
✱Ó. If you wish to insert a blank into all V-tracks of
all tracks, select Ò
✱ - ✱Ó.
3. Make settings for the following items, and execute the
track insert operation.
To (to point):
Specify the time location at which the
blank will be inserted.
Len (length): Specify the time length of the blank.
< An easy way to specify the time settings >
The time for the To point can be specified directly without
having to display the Track Insert page. In Play condition,
use the following procedure.
1. Move to the time location into which you wish to insert
the blank (To point).
2. Hold down [TRACK] and press [LOC4/8].
If you now access the Track Erase page, the time that was
specified in steps 1Ð2 will be input as the time setting for
the To point. Just specify the length of the blank (Length),
and execute Track Erase.
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIMETIME
48
24
4
0
dB
1122
Insert location (Track – V track)
TimeTo
Length
Blank
CONDITION MARKER#
MASTER
INPUT TRACK
AUX
TIMETIME
48
24
4
0
dB
1122
Exchange source
(Track – V track)
Exchange destination
(Track – V track)
Chapter 4 Editing a recorded performance (track editing)
82