Filter
Top Products
7. Insert a Zip disk into the Zip drive, and press [YES].
The display will ask ÒSNG Stow In SC5:U?Ó If it is OK
to copy the data, press [YES] twice. To cancel the opera-
tion, press [NO].
8. The display will ask, “Store Current?” If you wish to
store the current song, press [YES]. If you decide not to
store, press [NO].
9. The display will ask, “You’ll Lose Data/Continue ?” If
you press [YES] the Song Copy operation will be exe-
cuted. If you decide to cancel the Song Copy operation,
press [NO].
* All data stored on the Zip disk will be lost. Do not use a
Zip disk that contains song data you wish to keep.
10.If the amount of song data is more than can be copied
onto one Zip disk, the disk will be ejected, and the dis-
play will request “PleaseInsertDisk.” Insert the next
disk, and press [YES].
You will return to step 9.
At this time, write the disk numbers on the disk labels
so that you will remember the sequence in which they
were inserted.
11.If the copy operation involved two or more disks, the
display will say “Insert Disk #” (# indicating the disk
insertion sequence) at the end. Insert each disk in the
correct order, and press [YES].
When copying has been completed successfully, you
will return to Play condition.
Procedure for loading from multiple
disks (Extract)
When you wish to use archive-song data that was saved to
a removable disk drive, use the following procedure to load
the song data into the current drive.
1. Press [SONG], use PARAMETER [ ][ ] to get
the “SNG Song Copy?” display, and press [YES].
2. The display will indicate “SNG CpyMode=.” Use the
TIME/VALUE dial to select “Archives.”
3. Press PARAMETER [>>] to get the “SNG ArcTarget=”
display, and use the TIME/VALUE dial to select the
song that you wish to load.
To load the data of a single song, select Ò1 Song.Ó To
load all the song data, select ÒAll.Ó
4. Press PARAMETER [ ] to get the “SNG Arc.Drive=”
display, and use the TIME/VALUE dial to select the disk
drive from which the data will be loaded.
Here we will read from a Zip drive, so select SC5:U.
5. Press PARAMETER [ ] to get the “SNG Arc.Func=
display, use the TIME/VALUE dial to select “Extract.”
6. Insert a Zip disk into the Zip drive, and press [YES].
The display will ask “SNG Extract SC5:0?” If it is OK to
copy the data, press [YES] twice. To cancel the opera-
tion, press [NO].
In step 3, select Ò1 Song.Ó If two or more songs were
saved to the Zip disk, the names of the saved songs will
also be displayed. Use the TIME/VALUE dial to select
the name of the song you wish to copy, and press [YES]
twice.
7. The display will ask “Store Current?” If you wish to store
the current song, press [YES]. If you decide not to
store, press [NO].
8. If you have selected “All” in step 3, the display will ask
“Init. IDE:0 OK?” This message is asking you to confirm
that you wish to initialize the loading destination drive
(the internal hard disk). If you wish to initialize the drive
and then load, press [YES]. If you decide not to initial-
ize, press [NO].
* If at this point you press [YES], all songs saved on the
internal hard disk will be lost. Normally you should press
[NO]. If the loading destination hard disk does not have
sufficient space, you should first make a backup copy of
the internal hard disk, and then press [YES].
9. Loading will be executed. If the copy operation involved
two or more disks, the disk will be ejected, and you will
be prompted to “PleaseInsertDisk.” Insert the next disk
and press [YES].
When the data has been loaded correctly, you will
return to Play condition.
If you have problems saving
the data
¥ Is the Zip drive connected correctly?
¥ Is the copy destination drive specified correctly?
¥ Does the disk drive have enough free area?
¥ Is the destination drive writeable?
Chapter 6 Use with a Zip drive
96