Filter
Top Products
– 17 –
PARALLEL OUTPUT7-10
Presence or absence of output signal at the PARALLEL OUTPUT7 to 10 connectors on the rear panel of the SRP-X700P is indicated by the
8-bit data.
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
0 1 0 0 OUT10 OUT9 OUT8 OUT7
When the corresponding bit is ‘1’, output signal is present. When the corresponding bit is ‘0’, output signal is absent.
Bit-4 to bit-7 are fixed all the time.
FADER VALUE
The fader value [dB] of each input channel, output channel and of the group fader is indicated as shown in the table below.
The fader value of each input channel and output channel is the value that is shown by the yellow marker on the side of the fader in the
INPUT OVERVIEW screen and OUTPUT OVERVIEW screen of the supplied software SRP-X700P Manager.
FADER VALUE FADER VALUE FADER VALUE
- ∞ 30[H] (‘0’) -12.0 48[H] (‘H’) +3.5 60[H] (‘`’)
-70.0 31[H] (‘1’) -11.0 49[H] (‘I’) +4.0 61[H] (‘a’)
-60.0 32[H] (‘2’) -10.0 4A[H] (‘J’) +4.5 62[H] (‘b’)
-55.0 33[H] (‘3’) -9.0 4B[H] (‘K’) +5.0 63[H] (‘c’)
-50.0 34[H] (‘4’) -8.0 4C[H] (‘L’) +5.5 64[H] (‘d’)
-45.0 35[H] (‘5’) -7.0 4D[H] (‘M’) +6.0 65[H] (‘e’)
-40.0 36[H] (‘6’) -6.0 4E[H] (‘N’) +6.5 66[H] (‘f’)
-35.0 37[H] (‘7’)-5.0 4F[H] (‘O’) +7.0 67[H] (‘g’)
-32.5 38[H] (‘8’)-4.5 50[H] (‘P’) +7.5 68[H] (‘h’)
-30.0 39[H] (‘9’)-4.0 51[H] (‘Q’) +8.0 69[H] (‘i’)
-27.5 3A[H] (‘:’)-3.5 52[H] (‘R’)+8.5 6A[H] (‘j’)
-25.0 3B[H] (‘;’)-3.0 53[H] (‘S’)+9.0 6B[H] (‘k’)
-24.0 3C[H] (‘<’)-2.5 54[H] (‘T’)+10.0 6C[H] (‘l’)
-23.0 3D[H] (‘=’)-2.0 55[H] (‘U’) +11.0 6D[H] (‘m’)
-22.0 3E[H] (‘>’)-1.5 56[H] (‘V’) +12.0 6E[H] (‘n’)
-21.0 3F[H] (‘?’)-1.0 57[H] (‘W’) +13.0 6F[H] (‘o’)
-20.0 40[H] (‘@’)-0.5 58[H] (‘X’) +14.0 70[H] (‘p’)
-19.0 41[H] (‘A’) 0 59[H] (‘Y’) +15.0 71[H] (‘q’)
-18.0 42[H] (‘B’)+0.5 5A[H] (‘Z’) +16.0 72[H] (‘r’)
-17.0 43[H] (‘C’) +1.0 5B[H] (‘[’) +17.0 73[H] (‘s’)
-16.0 44[H] (‘D’)+1.5 5C[H] (‘\’) +18.0 74[H] (‘t’)
-15.0 45[H] (‘E’) +2.0 5D[H] (‘]’) +19.0 75[H] (‘u’)
-14.0 46[H] (‘F’) +2.5 5E[H] (‘^’) +20.0 76[H] (‘v’)
-13.0 47[H] (‘G’) +3.0 5F[H] (‘_’)