Filter
Top Products
Agilent E1538A Enhanced Frequency/Totalize/PWM SCP 45
INPut:THReshold[:LEVel]
INPut:THReshold[:LEVel] <
level
>,(@<
ch_list
>) •allows
programmatically setting the input threshold level for each input
configured channel.
Parameters
Comments • <level> can be set to a resolution of .375V
• . While input polarity is set to NORMAL, an input level higher than the
threshold level is considered a logic one, and an input level lower than
the threshold level is considered a logic zero. If input polarity is set to
INVerted, an input level higher than the threshold level is considered a
logic zero and an input level lower than the threshold level is considered
a logic one.
Note The value sent for <level> will be rounded to the nearest multiple of 0.375
Volts. For instance, 5 would be 4.875, 10 would be 10.125, 9.5 would be
9.375, and 15 would be 15. The INP:THR:LEV? query will return the
actual setting.
• Related Commands: INPut:POLarity, INP:THR:LEV?
• *RST Condition: INP:THR:LEV = 1.875
• Send with VXIplug&play Function: hpe14XX_cmd(...)
INPut:THReshold[:LEVel]?
INPut:THReshold[:LEVel]? (@<
channel
>) returns the threshold level set
for <channel>.
Parameters
Comments • <channel> must specify a single channel.
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
level numeric (float32) -46 VDC to +46 VDC none
ch_list string 100 - 163 none
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
channel string 100 - 163 none