Filter
Top Products
60 Agilent E1538A Enhanced Frequency/Totalize/PWM SCP
SENSe:PERiod:MODE?
SENSe:PERiod:MODE? (@<
channel
>) returns the measurement
interval mode currently set for period measurement.
Parameters
Comments • <channel> must be a single channel on an E1538A SCP.
• RETURNS: String value "APER" or "NPER", Type is String
• .Send with VXIplug&play Function: hpe14XX_cmdString_Q(...)
SENSe:PERiod:NPERiods
SENSe:PERiod:NPERiods <
count
>,(@<
ch_list
>) sets the number of
signal periods to measure and average in order to compute the input
signal period.
Parameters
Comments • <ch_list> must be channels on an E1538A SCP.
• This feature is only available when the NPERiods period mode is in use:
SENSe:PERiod:MODE NPERiods,<ch_list>
• Related Commands: SENSe:PERiod:MODE
• RESET Condition: is “MINimum” (i.e. 1).
• .Send with VXIplug&play Function: hpe14XX_cmd(...)
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
channel string 100 - 163 none
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
count numeric (uint32) 1 to 255 | MINimum | MAXimum seconds
ch_list string 100 - 163 none