Filter
Top Products
50 Agilent E1538A Enhanced Frequency/Totalize/PWM SCP
SENSe:FREQuency:LIMit:LOWer?
[SENSe:]FREQuency:LIMit:LOWer? <channel> returns the lower
frequency limit currently set for <channel>
Parameters
Comments • <channel> must be a single channel on an E1538A SCP.
• Returned Value: .01667 to 250, The type is float32.
• Send with VXIplug&play Function: hpe14XX_cmdReal64_Q(...)
[SENSe:]FUNCtion:CONDition
[SENSe:]FUNCtion:CONDition <
ch_list
> sets the SENSe function to input
the digital state for channels in <ch_list>. See “Reading Static Digital State”
on page 14.
Parameters
Comments • The E1538 SCP senses the single bit digital state on each channel
specified by this command.
• If the channels specified are not on a digital SCP, an error will be
generated.
• Use the INPut:POLarity command to set input logical sense.
• Related Commands: INPut:POLarity
• *RST Condition: SENS:FUNC:COND and INP:POL NORM for all
digital SCP channels.
• Send with VXIplug&play Function: hpe14XX_cmd(...)
Usage See “Reading Static Digital State” on page 14.
To set upper 4-bits of E1538 at SCP position 5 to digital inputs send:
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
channel string 100 - 163 none
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
ch_list string 100 - 163 none