Filter
Top Products
Agilent E1538A Enhanced Frequency/Totalize/PWM SCP 63
is triggered.
• If the channels specified are not on a Frequency/Totalize SCP, an error
will be generated.
• Related Commands: SENS:FUNC:TOT, INPUT:POLARITY
• *RST Condition: SENS:TOT:RESET:MODE INIT
• Send with VXIplug&play Function: hpe14XX_cmd(...)
Usage SENS:TOT:RESET:MODE TRIG,(@134)
totalizer at channel 34 resets at
each trigger event
[SENSe:]TOTalize:RESet:MODE?
[SENSe:]TOTalize:RESet:MODE? <
channel
> returns the reset mode for
the totalizer channel in <channel>.
Parameters
Comments • Channel must specify a single channel.
• If the channel specified is not on a frequency/totalize SCP, an error will
be generated.
• Returned Value: returns INIT or TRIG. The type is string.
• Send with VXIplug&play Function: hpe14XX_cmdString_Q(...)
SOURce:FM[:STATe]
SOURce:FM[:STATe] <
enable
>,(@<
ch_list
>) enables the Frequency
Modulated mode for a PULSe channel.
Parameters
Comments • This command is coupled with the SOURce:PULM:STATE command.
If the FM state is ON then the PULM state is OFF. If the PULM state
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
channel string 100 - 163 none
Parameter
Name
Parameter
Type
Range of
Values
Default
Units
enable boolean (uint16) 1 | 0 | ON | OFF none
ch_list string 100 - 163 none