Filter
Top Products
56 Specifications
01V96i—Owner’s Manual
AD Input (13–16)
Gain control
30 dB (–26 to +4), detented
Peak indicator
LED (red) turns on when post HA level reaches 3 dB below clipping at dig-
ital domain
Signal indicator
LED (green) turns on when post HA level reaches 20 dB below nominal at
digital domain
AD converter
24-bit linear, 128-times oversampling (fs=44.1, 48 kHz), 64-times over-
sampling (fs=88.2, 96 kHz)
Input selector
CH15/16/2TR IN for CH15/16
Digital Input
(2TR IN DIGITAL, ADAT input)
Option Input (SLOT) Available cards
Optional digital interface cards (MY16, MY8, MY4 series)
Input Channel CH1–32
Input patch
—
Phase
Normal/reverse
Gate-type
3
On/off
Key in: 12 ch Group (1–12, 13–24, 25–32)/AUX1–8
Comp-type
4
On/off
Key in: self /Stereo Link
Pre EQ/pre fader/post fader
Attenuator
–96.0 to +12.0 dB (0.1 dB step)
EQ
4-band PEQ (TYPE1)
5
On/off
Delay
0–43400 samples
On/off
—
Fader
100 mm motorized (INPUT/AUX1–8)
Aux send
On/off
AUX1–8; pre fader/post fader
Solo
On/off
Pre fader/after pan
Pan
127 positions (Left= 1–63, Center, Right= 1–63)
Surround pan
127 127 positions
([Left= 1–63, Center, Right= 1–63] x [Front= 1–63, Center, Rear= 1–63])
LFE level
–, –96 dB to +10 dB (256 step)
Routing
STEREO, BUS1–8, DIRECT OUT
Direct out
Pre EQ/pre fader/post fader
Metering
Displayed on LCD
Peak hold on/off
Stereo Input Channel CH1–4
Input patch (L/R)
—
Phase (L/R)
Normal/reverse
Attenuator (L/R)
–96.0 to +12.0 dB (0.1 dB step)
Equalizer
4band PEQ (TYPE1)
5
On/off
—
Fader
100 mm motorized
INPUT/AUX1–8 send
Aux send
On/off
AUX1–8; pre fader/post fader
Solo
On/off
Pre fader/after pan
Pan (L/R)
127 positions (Left= 1–63, Center, Right= 1–63)
Surround pan
(L/R)
127 127 positions
([Left= 1–63, Center, Right= 1–63] x [Front= 1–63, Center, Rear= 1–63])
LFE level (L/R)
–, –96 dB to +10 dB (256 step)
Routing
STEREO, BUS1–8, DIRECT OUT
Metering
Displayed on LCD
Peak hold on/off