2
Bosch Security Systems | 04-2003 | 3922 988 43318 en
Digital Congress Network | Installation and Operating Manual | Chapter 3 - Interpretation Equipment
en | 3-5
LBB 3520/10 Interpreter desk with back-lighting LC-display
3.1.3 LBB 3513/00 Analog Audio Input/output Module
The Analog Audio Input/Output Module type LBB 3513/00 has been designed for use in the BOSCH
Digital Congress Network (DCN) system. The module is used to connect external analog audio
equipment for distribution through one of the DCN audio distribution channels. The module also
provides monitoring facilities for the distributed audio channels as well as facilities for coupling to
external audio reproduction systems and audio recording equipment.
FIG 3-5 LBB 3513/00 Analog Audio Input/Output module
The module is ideally suited for the following applications:
• Audio/music input for distribution via DCNs language channels.
• Distribution of one of DCNs distribution channels to a PA system, monitoring or recording
facilities.
• Connecting an interpreter at a remote site via standard communication links e.g. telephone line.
• Connecting to a remote DCN system.
The module also includes a remote control facility for custom built panel solutions where channel
selection and various signal indications are available on a 25-pole SUB-D connector.
NOTE: Only DCN software 8.10
or higher. For further information
on applications and connection
details refer to the Instructions
for use for the module, code No.
(3922 988 9251x).
