Filter
Top Products
18
Chapter 2 Creating You Own Favorite Tones (Patches)
SPEAKER:
Selects the speaker type. When ORIGINAL is selected, you
can select the speakers that are best suited for the PREAMP
TYPE settings.
OVERDRIVE/DISTORTION TYPE:
Selects the type of overdrive or distortion.
* After pressing [TYPE VARIATION], you can select
variations by turning the knob to the type you want.
OVERDRIVE/DISTORTION DRIVE:
Adjusts the degree of overdrive or distortion. The distortion
appears stronger as the knob is turned to the right.
OVERDRIVE/DISTORTION LEVEL:
Adjusts the overdrive/distortion volume level. The volume
increases as the knob is turned to the right.
DELAY FEEDBACK:
Adjusts the number of times the delay is repeated. The
number of repeats increases as the knob is turned to the
right.
DELAY LEVEL:
Adjusts the volume level of the delay sound. The delay
sound increases as the knob is turned to the right.
CHORUS LEVEL:
Adjusts the volume level of the chorus sound. The chorus
sound increases as the knob is turned to the right.
REVERB LEVEL:
Adjusts the volume level of the reverb sound. The reverb
sound increases as the knob is turned to the right.
PATCH LEVEL:
Adjusts the overall volume level. The volume increases as the
knob is turned to the right.
When you want to save a tone created with EZ Tone, or
changed with the knob controls, use the Write procedure
(p. 22) to save the tone to a User patch.
Adding Effects
The GT-6’s internal effects are switched on and off with
button controls. The indicator for an effect’s ON/OFF button
lights up when the effect is enabled.
fig.02-04
1. Press the ON/OFF button for the effect you want to be
able to switch on and off.
The settings for the selected effect appear in the display.
fig.02-05
2. Press the ON/OFF button again to switch the effect on
or off.
* The effect name flashes in the display when that effect is
disabled.
* When FX-1, FX-2, or WAH is selected in Step 1, the effect set
with the FX Select parameter (“Making More Detail Settings
with Individual Parameters,” see p. 19) is switched on and off.
3. To select another effect to be switched on and off,
repeat Steps 1 and 2.
4. Press [EXIT] to return to the Play screen.
* If you want to save a tone with the settings you’ve made, use
the Write procedure (p.22) to save the tone to a User patch.
4
1,2,3