Filter
Top Products
47
Chapter
5
Chapter 5 Settings for Using the Expression
and Control Pedals (Pedal Assign)
This chapter describes how to make the settings that allow
you to control effects with the expression pedal and control
(CTL) pedal.
Settings for Using the
Expression Pedal
Setting the Range of the Volume Change
You can set the minimum and maximum values determining
the range over which the volume level changes when you
move the expression pedal.
1. Press [PEDAL ASSIGN]
2. Press PARAMETER [ ] [ ] to display the
following screen.
(Setting the minimum value)
fig.05-01
(Setting the maximum value)
fig.05-02
3. Rotate the PATCH/VALUE dial to set the value.
Valid Settings: 0–100
4. To save the settings, perform the Write procedure
(p. 22).
Press [EXIT] to return to the Play screen.
If You Don’t Want to Use the
Expression Pedal as a “Volume Pedal”
Use the procedure below to turn the expression pedal off.
1. Press [PEDAL ASSIGN].
2. Press PARAMETER [ ] [ ] a number of times,
until you have one of the following screens displayed.
fig.05-03
3. Press [PEDAL ASSIGN] to set it to “Off.”
4. To save the settings, perform the Write procedure
(p. 22).
Press [EXIT] to return to the Play screen.
Settings for Using the
Expression Pedal Switch/CTL Pedal
Making Settings Instantly
(Quick Setting)
Quick Setting is a function that lets you set the most common
values for effect parameters instantly just by selecting the
preset “pedal settings.” This greatly reduces the hassle of
selecting and setting parameters one by one.
Pedal Settings for the Expression Pedal Switch
Select the parameter to be controlled when you press down
on the toe of the expression pedal.
P01: WAH
P02: FX-2
P03: OD/DS
P04: DELAY
P05: CHORUS
P06: EQ
P07: FX-1
P08: LEVEL INC
P09: TUNER
P10: MANUAL
Normally, “FV” (Foot Volume) is assigned to the
expression pedal, allowing you to use the pedal as a
“volume pedal” for controlling the volume level.
When “WAH” (Pedal Wah; p. 30), or FX-2 “PB”
(Pedal Bend; p. 40) is on, the expression pedal
automatically functions as a “pedal wah” or “pedal
bend.”
* When Pedal Wah and Pedal Bend are off, the expression
pedal automatically functions as a “volume pedal.”