Filter
Top Products
20
Chapter 2 Creating You Own Favorite Tones (Patches)
Using the Pedal Effects
(Wah, Pedal Bend)
You can use the GT-6’s expression pedal to obtain wah and
pedal bend (pedal-controlled pitch bend) effects.
Wah
fig.02-08
1. Press [WAH].
2. Turn on the wah effect (“Adding Effects”; p. 18).
* This step is not required if the effect is already on.
3. Press PARAMETER [ ] [ ] to select the FX
Select parameter.
4. Rotate the VALUE dial to change the value (setting) to
“WAH.”
You can now get a pitch wah effect by moving the
expression pedal.
* By assigning the WAH ON/OFF function to the expression
pedal switch, you can switch the wah effect on and off by
firmly pressing down on the pedal’s toe.
5. Press [EXIT] to return to the Play screen.
* If you want to save a tone with the settings you’ve made, use
the Write procedure (p. 22) to save the tone to a User patch.
Pedal Bend
fig.02-09
1. Press [FX-2].
2. Turn on the FX-2 effect (“Adding Effects”; p. 18).
* This step is not required if the effect is already on.
3. Press PARAMETER [ ] [ ] to select the FX
Select parameter.
4. Rotate the VALUE dial to change the value (setting) to
“PB.”
You can now get a pitch bend effect by moving the
expression pedal.
* By assigning the PB ON/OFF function to the expression pedal
switch, you can switch the Pedal Bend effect on and off by
firmly pressing down on the pedal’s toe.
5
4
3
1
5
4
3
1