Filter
Top Products
40
Chapter 4 The Effects Explained
■ PB (Pedal Bend)
This lets you use the pedal to get a pitch bend effect.
The GT-6’s expression pedal automatically switches to the
pedal bend function when PB is selected.
Pitch Min
This sets the pitch at the point where the expression pedal is
fully lifted.
Pitch Max
This sets the pitch at the point where the expression pedal is
all the way down.
Pdl Position (pedal position)
This adjusts the position of the pedal bend.
Effect Level
This adjusts the volume of the pitch bend sound.
Direct Level
This adjusts the volume of the direct sound.
■ 2CE (2x2 Chorus)
Two separate stereo chorus units are used for the low-
frequency and high-frequency ranges in order to create a
more natural chorus sound.
Xover f (crossover frequency)
This parameter sets the frequency at which the frequency
components of the direct sound are divided into bass and
treble bands.
Low Rate
Adjust the speed of the chorus effect for the low frequency
range.
* When set to BPM, the value of each parameter will be set
according to the value of the Master BPM (p.46) specified for
each patch. This makes it easier to achieve effect sound settings
that match the tempo of the song (synchronizing the cycle to
one-half or one-fourth of the BPM when the set cycle rate is
increased). When setting to BPM, press PARAMETER
[] to display the Master BPM settings screen.
Low Depth
Adjust the depth of the chorus effect for the low frequency
range. If you wish to use this as a doubling effect, use a
setting of “0.”
Low Pre Delay
Adjust the time from when the low frequency range direct
sound is output until the effect sound is output. Extending
the pre-delay will produce the sensation of multiple sounds
(doubling effect).
Low Level
Adjust the volume of the low frequency range.
High Rate
Adjust the speed of the chorus effect for the high frequency
range.
* When set to BPM, the value of each parameter will be set
according to the value of the Master BPM (p. 46) specified for
each patch. This makes it easier to achieve effect sound settings
that match the tempo of the song (synchronizing the cycle to
one-half or one-fourth of the BPM when the set cycle rate is
increased).
When setting to BPM, press PARAMETER [ ] to display
the Master BPM settings screen.
High Depth
Adjust the depth of the chorus effect for the high frequency
range. If you wish to use this as a doubling effect, use a
setting of “0.”
High Pre Delay
Adjust the time from when the high frequency range direct
sound is output until the effect sound is output. Extending
the pre-delay will produce the sensation of multiple sounds
(doubling effect).
High Level
Adjust the volume of the high frequency range.
■ PAN
With the volume level of the left and right sides alternately
changing, whn playing sound in stereo, you can get an effect
that makes the guitar sound appear to fly back and forth
between the speakers.
Wave Shape
This adjusts changes in volume level.
Rate
Adjusts the frequency (speed) of the change.
* When set to BPM, the value of each parameter will be set
according to the value of the Master BPM (p. 46) specified for
each patch. This makes it easier to achieve effect sound settings
that match the tempo of the song (synchronizing the cycle to
one-half or one-fourth of the BPM when the set cycle rate is
increased).
When setting to BPM, press PARAMETER [ ] to display
the Master BPM settings screen.
Depth
Adjusts the depth of the effect.