Filter
Top Products
66
Chapter 9 Using MIDI
MIDI PC OUT
(MIDI Program Change Out)
Off, On
fig.09-08
This setting determines whether or not Program Change
messages are output when patches are switched on the GT-6.
Off: Program Change messages are not output, even
when patches are switched.
On: Program Change messages are simultaneously
output when patches are switched.
* On the GT-6, Bank Select messages are output simultaneously
with Program Change messages. For more details, reefer to
“Changing patches using bank select messages” (p. 72).
MIDI EXP OUT (MIDI Expression Pedal Out)
Off, 1–31, 33–95
fig.09-09
This sets the controller number when expression pedal
operation data is output as Control Change messages. When
set to “Off, “ Control Change messages are not output.
MIDI EXP SW OUT
(MIDI Expression Pedal Switch Out)
Off, 1–31, 33–95
fig.09-10
This sets the controller number when expression pedal
switch operation data is output as Control Change messages.
When set to “Off, “ Control Change messages are not output.
MIDI CTL OUT (MIDI Control Pedal Out)
Off, 1–31, 33–95
fig.09-11
This sets the controller number when CTL pedal operation
data is output as Control Change messages. When set to
“Off, “ Control Change messages are not output.
MIDI SUB CTL 1 OUT (MIDI Sub Control 1 Out)
Off, 1–31, 33–95
fig.09-12
This sets the controller number when operation data from
the external pedal connected to the SUB CTL 1 jack is output
as Control Change messages. When set to “Off, “ Control
Change messages are not output.
MIDI SUB CTL 2 OUT (MIDI Sub Control 1 Out)
Off, 1–31, 33–95
fig.09-13
This sets the controller number when operation data from
the external pedal connected to the SUB CTL 2 jack is output
as Control Change messages. When set to “Off, “ Control
Change messages are not output.