Filter
Top Products
46
Chapter 4 The Effects Explained
MASTER
Parameter Value
Patch Level 0–200
Master BPM 40–250
Patch Level
This adjusts the output volume of the GT-6.
Master BPM
Adjust the BPM value for each patch.
* BPM (beats per minute) indicates the number of quarter note
beats that occur each minute.
* When you have an external MIDI device connected, the
Master BPM synchronizes to the external MIDI device’s
tempo, making it impossible to set the Master BPM. To enable
setting of the Master BPM, set “MIDI Sync Clock” (p. 65) to
Internal.
FV (Foot Volume)
This is a volume control effect.
Usually, this is controlled to the expression pedal.
Parameter Value
Level 0–100
Level
This adjusts the volume.
Control with the Master BPM
To input the Master BPM with the CTL pedal, set “Pedal
Assign” as follows.
Quick Setting (p. 47)
CTL PEDAL: P09= BPM (TAP)
Manual Settings (p. 49)
CTL PEDAL: On
CTL PEDAL Target: Master BPM (Tap)
CTL PEDAL Target Min: Off
CTL PEDAL Target Max: On
CTL PEDAL Source Mode: Normal