Filter
Top Products
99
Voice Processor
Voice Processor Setup: Talk
Advanced
Voice Processor Setup: Talk
This page is where you can set the Talk function, to be used to
address the audience, speaking over the background music.
Parameters contained in this page are relative, and are used to
attenuate the music when speaking.
After editing, you can save the Talk settings in memory, by
choosing the “Write Global-Voice Processor Setup” command
from the page menu (see page 219 of the User’s Manual).
Talk
Talk On/Off
On/off switch for the Talk function. This is the same switch you
can find in the Mic panel of the Style Play and Song Play modes.
This parameter is automatically set to off when turning the instru-
ment off.
Note: When you deactivate the Talk function, the Voice Processor
Preset is recalled. Any unsaved change to the Preset will be lost.
Mode
Auto (AutoTalk)
When this parameter is checked, the Talk function automatically
engages when the Player or Arranger is stopped. This way, you
can talk to the audience between two songs, without the need to
touch the Talk On/Off button.
Mixer
Master Volume Attenuation knob
Use this knob to reduce the volume of all tracks (Keyboard,
Style, Player, Pad…). 100% corresponds to no level reduction.
Voice Processor Preset: Easy Preset
This page allows you to select a Voice Processor Preset, as well as
turning on or off the various Voice processor blocks.
Preset
Voice Processor Preset
Use this parameter to select a Voice Processor Preset. A Preset is
the programming of all Voice Processor’s effect parameters. A
Preset is always saved in a Performance or STS. It is therefore
recalled when selecting a Performance or STS.
If you wish to save your Preset settings, just select the “Write
Global-Voice Processor Preset” command from the page menu
(see page 219 of the User’s Manual). The saved Preset will appear
in the list of available Presets.
Effects On/Off
Use these buttons to turn the effects on/off.
Effect Sets
Use the pop-up menus to choose a Set for each of the Voice Pro-
cessor effects. Sets configure useful settings to pre-programmed
values to allow you to make changes quickly.
Lev(el)
Level of the corresponding effect.
Tlk
Tlk
Tlk
SB
VPp
VPp
VPp