Filter
Top Products
62
Sound operating mode
Pitch: Pitch Mod
Pitch EG AMS (Alternate Modulation Source)
This parameter selects the source that will modulate the pitch
EG of the selected oscillator. See “AMS (Alternate Modulation
Source) list” on page 77).
Pitch EG Intensity
This parameter specifies the depth and direction of the effect
that “AMS” will have. For example, if you set “AMS” to Velocity
and set this value to +12.00, the velocity will control the range of
pitch change produced by the pitch EG in a range of ±1 octave.
As you play more softly, the pitch change will draw closer to the
pitch EG levels.
Note: “Intensity” (Pitch EG) and AMS will be added to determine
the depth and direction of the pitch modulation applied by the
pitch EG.
Portamento
Enabled
This parameter turns the portamento effect (smooth change in
pitch from one note to the next) on/off, and specifies how it will
be applied.
Note: Portamento will also be switched when CC#65 (Portamento
SW) is received.
On Portamento will be applied.
Off Portamento will not be applied.
Fingered
This parameter specifies whether the portamento effect restarts
or not with each note played.
On Portamento will restart with each note.
Off Portamento will not restart with each note.
Time
This parameter sets the portamento time. Increasing the value
will produce a slower change in pitch.
000…127 Portamento time in MIDI value.
LFO 1/2
LFO1/2 Int
Intensity of the corresponding LFO.
-12…0…+12 Parameter value. Negative values invert the LFO
shape.
JS+Y
Intensity of the corresponding LFO when the joystick is pushed
forward.
-12…0…+12 Parameter value. Negative values invert the LFO
shape.
AMS / Intensity
Alternate Modulation Source for the LFO. See “AMS (Alternate
Modulation Source) list” on page 77. Use the “Intensity” param-
eter to set the intensity of the modulation.
Pitch change (level)
Softly played
(Intensity (Pitch EG) setting)
Strongly played with a
negative (–) value
Strongly played with
a positive (+) value
Note-on
Note-off
Note-on
Note-off
Note-on
Note-off