Filter
Top Products
152
Effects
Reverb and Early Reflections (Reverb ER)
Reverb and Early Reflections (Reverb ER)
80: Reverb Hall
This hall-type reverb simulates the reverberation of mid-size
concert halls or ensemble halls.
81: Reverb SmoothHall
This hall-type reverb simulates the reverberation of larger halls
and stadiums, and creates a smooth release.
82: Reverb Wet Plate
This plate reverb simulates warm (dense) reverberation.
83: Reverb Dry Plate
This plate reverb simulates dry (light) reverberation.
b: Pre Delay [msec]
b: Pre Delay Thru [%]
The “Pre Delay” sets the delay time to the reverb input, allowing
you to control spaciousness.
Using the “Pre Delay Thru” parameter, you can mix the dry
sound without delay, emphasizing the attack of the sound.
84: Reverb Room
This room-type reverb emphasizes the early reflections that
make the sound tighter. Changing the balance between the early
reflections and reverb sound allows you to simulate nuances,
such as the type of walls of a room.
a
Reverb Time
[sec]
0.1...10.0 Sets the reverberation time
High Damp [%] 0...100
Sets the damping amount in the
high range
b
Pre Delay
[msec]
0...200
Sets the delay time from the dry
sound
Pre Delay Thru
[%]
0...100
Sets the mix ratio of non-delay
sound
c EQ Trim 0...100 Sets the EQ input level
d
Pre LEQ Fc
Low,
Mid-Low
Selects the cutoff frequency (low or
mid-low) of the low-range equalizer
Pre HEQ Fc
High,
Mid-High
Selects the cutoff frequency (high or
mid-high) of the high-range
equalizer
e
Pre LEQ Gain
[dB]
–15.0...+15.0 Sets the gain of Low EQ
Pre HEQ Gain
[dB]
–15.0...+15.0 Sets the gain of High EQ
f
Wet/Dry
Dry, 1:99...99:1,
Wet
Balance between the wet and dry
signal
Src Off...Tempo
Table , “Dynamic Modulation
sources,” on page 106
Amt –100...+100 Amount of modulation source
Left
Right
FX Amt
FX Amt
FX Amt = 100: Mono In - Stereo Out / FX Amt = 0: Stereo In - Stereo Out
EQ Trim
+
EQ Trim
LEQ HEQ
Pre Delay
Reverb
Pre Delay Thru
Time
Reverb - Hall / Plate Type
Level
Louder
Dry
Reverb
Pre Delay Thru
Pre Delay
Reverb Time