Filter
Top Products
239
Assignable parameters
List of Assignable Footswitch / Pedal functions
Advanced
SubScale Preset 1 (SC1)…4
(SC4)
Same functions of the SC Preset buttons in
the display.
Chord Latch Holds the recognized chord until the pedal is
released
Chord Latch + Damper Holds the recognized chord until the pedal is
released, and sustains the tracks where the
Damper has been turned on
Glide When the pedal is pressed, affected notes on
Upper tracks are bent down, according to set-
tings for the Pitch Bend on the same tracks.
When the pedal is released, notes return to
the normal pitch, at the speed defined by the
“Time” parameter (see “Glide” on page 201 of
the User’s Manual).
Audio In Mute
Microphone Talk Turns all Voice Processor effects down, to let
you address the audience. See “Voice Proces-
sor Setup: Talk” on page 99.
Mic Lead On/Off On/off switch controls assigned to the Voice
Processor. Press to activate, press a second
time to deactivate.
Mic Harmony On/Off
Mic Double On/Off
Mic Filter On/Off
Mic HardTune On/Off
Mic uMod On/Off
Mic Delay On/Off
Mic Reverb On/Off
FX CC12 Switch
Standard FX controllers
FX CC13 Switch
Rotary Spkr On/Off
Rotary Spkr Fast/Slow
Drawbar Perc On/Off
Text Page Down These options let you move to the previous or
next page, when reading a text file loaded
with a Song or Song Book entry (see “Text
files loaded with Standard MIDI Files and MP3
files” on page 170 of the User’s Manual).
Text Page Up
SongBook Next Moves to the next SongBook entry in the
selected Custom List.
Pad 1
Same functions of the control panel buttons
with the same name
Pad 2
Pad 3
Pad 4
Pad Stop
Sound Controller 1 To be used as triggers for two DNC parameter
(transmit CC#80 or CC#81). When these func-
tions are assigned to the selected physical
controller, this latter becomes the corre-
sponding Sound Controller (Sound Controller
1 or Sound Controller 2). You can then use
this Sound Controller to control any of the
DNC parameters.
Sound Controller 2
Master Volume
Accompaniment Volume
Keyboard Expression
Pad Volume With this function assigned, you can control
the proportional volume of all four Pads at
the same time. Please note that the status of
the Pad’s volume, after having been modified
with a pedal or slider, is made current, and
will be saved in a Performance or STS by
using the relevant Write procedure.
Joystick +X Joystick right
Function Meaning
Joystick -X Joystick left
Joystick +Y Joystick forward
Joystick -Y Joystick backward
Upper VDF Cutoff Filter cutoff (for Sounds assigned to the
Upper tracks)
Upper VDF Resonance Filter resonance (for Sounds assigned to the
Upper tracks)
Mic In Level
Mic Lead Voice Level Continuous controls assigned to the Voice
Processor.
Mic Harmony/Double Level
Mic Harmony Level
Mic Double Level
Mic Filter Level
Mic uMod
Mic Delay/Reverb Level
Mic Delay Level
Mic Reverb Level
Mic EQ Gain Low
Mic EQ Gain Mid
Mic EQ Gain High
FX CC12 Ctl
Standard FX controllers
FX CC13 Ctl
Function Meaning