Korg PA3 Recording Equipment User Manual


 
100
Voice Processor
Voice Processor Preset: Mixer/FX
Voice Processor Preset: Mixer/FX
This page contains master level controls for the Voice Processor
as a whole.
μMod
Mod. Level
Master Level of the µMod block.
Lead to Mod
Master Level of the Lead voice going to the µMod block.
Hrm/D to Mod
Master Level of the Harmony and Double effects going to the
µMod block.
Delay
Delay Level
Master Level of the Delay block.
Lead to Delay
Master Level of the Lead voice going to the Delay block.
Hrm/D to Dly
Master Level of the Harmonyand Double effects going to the
Delay block.
Mod. to Delay
Master Level of the µMod effect going to the Delay block.
Reverb
Reverb Level
Master Level of the Reverb block.
Lead to Rev
Master Level of the Lead voice going to the Reverb block.
Hrm/D to Rev
Master Level of the Harmony and Double effects going to the
Reverb block.
Delay to Rev
Master Level of the Delay effect going to the Reverb block.
Del/Rev
Dly/Rev Level
Master Level of the Delay and Reverb blocks. This corresponds
to the DELAY/REVERB knob in the MIC SETTINGS section.
This control is not memorized in the Voice Processor Preset.
Voice Processor Preset: Harmony
In this page you can define general parameters for the Harmony
block. The Harmony block produces up to four harmony voices.
Harmony
(Harmony) On/Off
This button allows enabling/disabling of the Harmony block. It
is the same control found in the “Easy Preset” page.
(Harmony) Type
Type of harmonization. These are the available parameters.
Chord Chords played on the keyboard, received from a
Song in Standard MIDI File format, or from the
MIDI IN.
MP3 Audio Chords recognized in a Song in MP3 format.
Scale Harmony notes are adapted to a scale.
Shift Harmony notes are exactly the indicated interval
above or under the Lead voice.
Notes Harmony voices play the notes played on the key-
board, received from a Song in Standard MIDI
File format, or from the MIDI IN.
Note: Some of the parameters in this page appear only when a
specified Harmony Type is selected.
Keyb(oard)
(Only available when the Harmony Type is Chord or Notes.) Use
this menu to select the keyboard range where Chords or notes
are to be received from.
Note: When this parameter is greyed out, notes or chords cannot
be received from the keyboard or from a Standard MIDI File.
VPp
VPp
VPp
VPp
VPp
VPp
VPp
VPp
VPp
VPp
VPp
VPp
VPp
VPp