Filter
Top Products
Parameters
62
2. Free[%].............................................................................
This indicates the percentage (%) of space available on the
currently-used card (i.e., space that can be written).
P.4-2 CdFxSave: Saving an effect user file
This operation saves the effect user data to the card.
1. Save Num.................................................................[1, 2]
Select the save destination for the effect data.
The normal effect write operation (→p.40) will always over-
write the data onto Num1.EFF. If you do not want to over-
write, select “2.”
1: The data will be saved to Num1 (the data that is loaded
at power-on).
2: The data will be saved to Num2.
P.4-3 CdFxLoad: Loading an effect user file
This operation loads the effect user data into internal
memory.
1. Load Num........................................................... [Int, 1, 2]
Select the effect data load source.
Int: Load the initial settings (preset data).
1: Load from Num1 (the data that is loaded at power-on).
2: Load from Num2.
It is not possible to load a user effect program individually.
P.4-4 CdRecvey: Recover card data
This operation checks and recovers a card. (→p.54)
Press the [CURSOR] right key to execute the Card Recover
operation.
P.4-5 CdFormat: Format a card
This operation formats (initializes) a card. A card that has
been used by another device must be formatted. (→p.54)
All the data on the card will be lost when you execute the
Format operation.
P5. System: System-related settings
Here you can make settings for the mixer and for record-
ing.
P.5-1 MixerSys: Mixer settings
Here you can set mixer-related parameters.
These settings are common to all songs.
1. AutoIn ................................................................ [Off, On]
Specify whether the input source of a track selected for
recording (RecSelect) will automatically be switched
according to the status of the recorder. When using punch
recording, we suggest you turn this setting “On.”
On: For tracks selected for recording, the input will be
switched automatically according to the status of the
recorder.
External input when the recorder is stopped
Track input when the recorder is playing
1.
2.
3.