Filter
Top Products
Appendices
89
→ Use Delete Song to delete unneeded songs.
EvntFull
Recording is not possible, since there are not enough
free events in the song.
→ To increase the number of free events, use “DelV-Trk”
(→p.49) to delete unneeded tracks.
In >Out
When executing a track editing operation such as
“CopyTrk,” the InTime is located later than the Out-
Time.
→ Re-specify the time settings correctly.
MarkFull
The number of marks has exceeded the limit.
→ Delete unneeded marks.
No Card!
No card is inserted.
→ Insert a card. If a card is already inserted, turn off the
power, re-insert the card, and then turn the power
back on.
NoLength
When executing a track editing operation, the InTime
and OutTime (or ToTime and EndTime) were set to the
same time location.
→ Set each time correctly.
NotReady
In Mark mode, either the mark is one that cannot be
erased, or the mark cannot be erased because the
recorder is operating.
→ Marks “–” and “00” cannot be erased. If another mark
is displayed, press the [STOP] key to stop the recorder,
and then erase the mark.
RecSave?
Do you want to save the recording as long as there is
space on the card?
→ This will be displayed after the “CardFull” warning is
displayed. Select “Yes” to save the recording on the
card, or “No” to discard the recording and not save it.
SameVTrk
You are attempting to edit the same virtual track of the
same track.
→ Check your track selection.
SngFilEr
The song data is incorrect or has been damaged.
→ Execute “CdRecvry” (→p.62). If an error message still
appears, use “DelSong” (→p.42) to delete that song.
SongFull
The maximum number of songs has been exceeded.
→ Delete unneeded songs.
To >End
When executing “ExpTrack,” the ToTime is set later
than the EndTime.
→ Set each time correctly.
To-End.5
When executing “ExpTrack,” the ToTime and End-
Time are set (relative to the InTime-OutTime) to set-
tings that cannot be executed (i.e., compression to less
than 50%).
→ Re-set the time settings to appropriate values.