Filter
Top Products
41: Tempo Delay
106
41: Tempo Delay
This delay allows you to match the delay time with a song’s tempo. For example, you can apply the delay
effect synchronized to the sequencer, or you can input the tempo prior to a real-time performance so that
the delay effect will match the song tempo. You can set the delay time in terms of a musical duration,
rather than as a value of time.
You can also specify any number of times for feedback.
a
Mode Manual, D-mod
Switches between the specified tempo and clock sync.
☞P.107
Src (fixed) Tempo Source when Mode = D-mod (fixed to Tempo)
b
Tempo [beat/min] 30…250 beat/min Tempo when Mode = Manual
☞P.107
Length 1…96 / 1…96
Sets the delay time. Delay time = Length x Whole Note.
☞P.107
c
Time Adjust [%] –10.00…+10.00% Fine adjustment of delay time
Delay 1362ms OVER!! Delay time upper limit/error indication
☞P.107
d
Feedback Count Off, On
Selects whether the number of feedback times is counted
or not.
☞P.107
Src (fixed) Gate1
Source that triggers the counting of the feedback time
(fixed to Gate1).
e Count [times] 0…96 Number of feedback times
☞P.107
f
Feedback –100…+100 Sets the feedback amount.
Src None…Tempo Modulation source of feedback amount
Amt –100…+100 Modulation amount of feedback amount
g High Damp [%] 0…100% Damping amount in the high range
☞P.44
h Low Damp [%] 0…100% Damping amount in the low range
☞P.44
i
Input Level D-mod: Src None…Tempo Modulation source of the input level
☞P.44
Amt –100…+100 Modulation amount of the input level
j
Wet/Dry Dry, 1:99…99:1, Wet Sets the balance between the effect and dry sounds.
Src None…Tempo Modulation source of effect balance
Amt –100…+100 Modulation amount of effect balance
Left
Right
Feedback
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
High Damp Low Damp
Feedback Count: On/Off
Tempo
Mode
D-mod
Manual
120 [beat/min]
Input Level D-mod
Input Level D-mod
+
Time Adjust [%]
Delay
Length: 3/16