Filter
Top Products
27: Stereo Tremolo
84
27: Stereo Tremolo
This is a stereo tremolo. You can create sound panning to left and right by offsetting the phase of the left
and right LFOs from each other. The tremolo effect can fade-in by means of the AutoFade function.
a
AUTOFADE Src None…Tempo
Selects the modulation source that triggers AutoFade.
☞P.59
Fade-In Rate 1…100 Sets the rate of fade-in.
b
LFO Waveform
Triangle, Sine, Square, Up,
Down
Selects LFO Waveform.
☞P.42
LFO Shape –100…+100
Determines how much the LFO waveform is changed.
☞P.32
c LFO Phase [degree] –180…+180 LFO phase difference between the left and right
☞P.84
d
LFO Frequency [Hz] 0.02…20.00Hz LFO speed
Src None…AUTOFADE Modulation source of LFO speed. AutoFade is available.
Amt –20.00…+20.00Hz Modulation amount of LFO speed
e
Depth 0…100 Depth of LFO modulation
Src None…AUTOFADE
Modulation source of the depth of modulation. AutoFade
is available.
Amt –100…+100 Modulation amount of the depth of modulation
f
Wet/Dry Dry, 1:99…99:1, Wet Sets the balance between the effect and dry sounds.
Src None…AUTOFADE
Modulation source of effect balance. AutoFade is avail-
able.
Amt –100…+100 Modulation amount of effect balance
c: LFO Phase [degree] This parameter determines the difference between the left and right LFO phases.
A higher value will simulate the auto-pan effect in which the sound is panned
between left and right.
Tremolo
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
LFO Frequency
AutoFade
LFO Phase
LFO: Tri/Sin/Sqr/Up/Down
LFO Shape
Tremolo
Depth
Wet/Dry