Filter
Top Products
09: St. Tempo Phaser
(Stereo Tempo Phaser)
130
09: St. Tempo Phaser
(Stereo Tempo Phaser)
This is a stereo tempo phaser. You can select random or step waveforms for the LFO, and synchronize the
speed of the random/step waveform with tempo. Also, synchronizing the LFO to note-on messages will
produce a phasing effect with a fixed timing.
a
LFO Sync Off, On LFO reset on/off
☞
P.109
Src None…Tempo Modulation source that resets LFO
b
LFO Waveform
Triangle, Sine, Step-Tri,
Step-Sin, Random
Selects LFO waveform.
☞
P.70
LFO Shape –100…+100
Determines how much the LFO waveform is changed.
☞
P.32
c
LFO Lch Phase [deg] –180…+180 Left LFO phase after reset
☞
P.109
Rch Phase [deg] –180…+180 Right LFO phase after reset
d LFO Mode Manual, D-mod
Switches between the specified tempo and clock sync.
☞
P.33
e
Src(fixed) Tempo Source when LFO Mode = D-mod (fixed to Tempo)
Tempo [beat/min] 30…250 beat/min Tempo when LFO Mode = Manual
☞
P.33
Length 1…16 / 1…16
Sets the LFO cycle. LFO Cycle = Length x Whole Note.
☞
P.33
Step 1…16 / 1…32
Sets the LFO step cycle. LFO step Cycle = Length x
Whole Note.
f Manual 0…100 Sets the center frequency to which the effect is applied.
g
Depth 0…100 Depth of LFO modulation
Src None…Tempo Modulation source of LFO modulation depth
Amt –100…+100 Modulation amount of LFO modulation depth
h Resonance –100…+100 Sets resonance amount.
☞
P.35
i
High Damp [%] 0…100% Resonance damping amount in the high range
☞P.35
Spread –100…+100
Sets the width of the stereo image of the effect sound.
☞P.65
j
Wet/Dry
–Wet…–1:99, Dry,
1:99…Wet
Sets the balance between the effect and dry sounds.
☞P.35
Src None…Tempo Modulation source of effect balance
Amt –100…+100 Modulation amount of effect balance
Phaser
Phaser
Left
Right
Resonance
Spread
LFO Phase
Wet / Dry
Wet / Dry
High Damp
Stereo In - Stereo Out
LFO Shape
Tempo
LFO Mode
D-mod
Manual
Length: 1/4
120 [beat/min]
LFO Sync
Step Length: 1/16
LFO: Step-Tri / Step Sin / Random
LFO: Tri / Sine