Filter
Top Products
42: St. Modulation Delay
108
42: St. Modulation Delay
This stereo delay uses an LFO to sweep the delay time. The pitch also varies. You will obtain a delay
sound with swell and shimmering. You can also control the delay time using a modulation source.
a Modulation Mode LFO, D-mod
Switches between LFO modulation control and modula-
tion source control.
b
D-mod Modulation L/R:+/+, L/R:+/– Reversed L/R control by modulation source ☞P.109
Src None…Tempo Modulation source that controls delay time
Response 0…30 Rate of response to the modulation source
c
LFO Waveform Triangle, Sine Selects LFO waveform.
LFO Shape –100…+100
Determines how much the LFO waveform is modified.
☞P.32
d LFO Frequency [Hz] 0.02…20.00Hz LFO speed
e
LFO Sync Off, On LFO reset off/on
☞P.109
Src None…Tempo Modulation source that resets the LFO
f
L LFO Phase [degree] –180…+180 Phase obtained when the left LFO is reset
☞P.109
R LFO Phase [degree] –180…+180 Phase obtained when the right LFO is reset
g
L Depth 0…200 Depth of the left LFO modulation
R Depth 0…200 Depth of the right LFO modulation
h
L Delay Time [msec] 0.0…500.0 Left delay time
R Delay Time [msec] 0.0…500.0 Right delay time
i
L Feedback –100…+100 Feedback amount of left delay
R Feedback –100…+100 Feedback amount of right delay
j
Wet/Dry
–Wet…–1:99, Dry,
1:99…Wet
Sets the balance between the effect and dry sounds.
☞P.25
Src None…Tempo Modulation source of effect balance
Amt –100…+100 Modulation amount of effect balance
Left
Right
Feedback
LFO Phase
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
LFO: Tri / Sine
Modulation Mode
D-mod
LFO
D
-mod
Delay
Delay
L/R: +/+ +/–
LFO Shape
Response
LFO Sync