Filter
Top Products
00: Flanger
142
00: Flanger
This effect is a monaural-in/stereo-out flanger, with a two-band equalizer, that allows you to control the
tonal quality of the effect sound.
a Delay Time [msec] 0.0…50.0msec Delay from the original sound
b
LFO Waveform Triangle, Sine Selects LFO Waveform.
LFO Shape –100…+100
Determines how much the LFO waveform is changed.
☞
P.32
c LFO Phase [degree] –180…+180 LFO phase difference between the left and right
☞
P.65
d
LFO Frequency [Hz] 0.02…20.00Hz LFO speed
Src None…Tempo Modulation source of LFO speed.
Amt –20.00…+20.00Hz Modulation amount of LFO speed
e Depth 0…100 Depth of LFO modulation
f
Feedback –100…+100 Feedback amount
☞
P.32
FB Mode Normal, Cross Sets the feedback routing.
☞
P.69
g High Damp [%] 0…100% Feedback damping amount in the high range
☞
P.32
h
EQ Trim 0…100 2-band EQ input level
LEQ [dB] –15…+15dB Low-EQ gain
HEQ [dB] –15…+15dB High-EQ gain
i Spread 0…100 Sets the width of the effect sound’s stereo image.
☞
P.65
j
Output Level –100…+100
Sets the balance between the effect and dry sounds.
☞
P.32, 142
Src None…Tempo Modulation source of effect balance.
Amt –100…+100 Modulation amount of effect balance
j: Output Level
When this parameter is set in the range of values from –100 to –1, the effect
sound will be output with its phase reversed.
FB Mode
(Normal/Cross)
Send1
Feedback
LFO Phase
High Damp
Mono In - Stereo Out
Return1
Left
Return1
Right
EQ Trim
LEQ
HEQ
Flanger
Flanger
LFO Shape
LFO: Tri / Sine
Output Level
Output Level
Spread
FB Mode
(Normal/Cross)