Filter
Top Products
12: Rotary Speaker OD (Rotary Speaker Overdrive)
134
h
Horn Acceleration 0…100
How quickly the horn rotation speed in the high range is
switched.
☞P.43
Horn Ratio Stop, 0.50…2.00
Adjusts the (high-range side) horn rotation speed. Stan-
dard value is 1.0. Selecting “Stop” will stop the rotation.
i
Mic Distance 0…50
Distance between the microphone and rotary speaker.
☞P.101
Mic Spread 0…50 Angle of left and right microphones
j
Wet/Dry Dry, 1:99…99:1, Wet Sets the balance between the effect and dry sounds.
Src None…Tempo Modulation source of effect balance
Amt –100…+100 Modulation amount of effect balance
a: Sw This parameter determines how to switch on/off the overdrive via a modula-
tion source.
When Sw = Momentary, overdrive is applied only when a pedal or joystick is
held in position.
Only when the value for the modulation source is 64 or higher, the over-
drive effect is applied.
When Sw = Toggle, overdrive is turned on/off each time the pedal or joystick is
operated.
Each time when the value for the modulation source exceeds 64, the over-
drive effect is switched on/off.