Filter
Top Products
17: Stereo Flanger
69
size2
17: Stereo Flanger
This is a stereo flanger. You can add spread to the sound by offsetting the phase of the left and right LFOs
from each other. The flanging effect can fade-in by means of the AutoFade function.
a
AUTOFADE Src None…Tempo
Selects the modulation source that triggers AutoFade.
☞P.59
Fade-In Rate 1…100 Sets the rate of fade-in.
b Delay Time [msec] 0.0…50.0msec Delay from the original sound
c
LFO Waveform Triangle, Sine Selects LFO Waveform.
LFO Shape –100…+100
Determines how much the LFO waveform is changed.
☞P.32
d LFO Phase [degree] –180…+180 LFO phase difference between the left and right
☞P.65
e
LFO Frequency [Hz] 0.02…20.00Hz LFO speed
Src None…AUTOFADE Modulation source of LFO speed. AutoFade is available
Amt –20.00…+20.00Hz Modulation amount of LFO speed
f Depth 0…100 Depth of LFO modulation
g
Feedback –100…+100 Feedback amount
☞P.32
FB Mode Normal, Cross Sets the feedback routing.
☞P.69
h High Damp [%] 0…100% Feedback damping amount in the high range
☞P.32
i Spread –100…+100 Sets the width of stereo image of effect sound.
☞P.65
j
Wet/Dry
–Wet…–1:99, Dry,
1:99…Wet
Sets the balance between the effect and dry sounds.
☞P.25, 32
Src None…AUTOFADE
Modulation source of effect balance. AutoFade is avail-
able
Amt –100…+100 Modulation amount of effect balance
g: FB Mode This parameter sets the feedback routing. “Cross” will select a crossover flanger
in which each channel applies feedback to the other channel.
Flanger
Flanger
FB Mode
(Normal/Cross)
Left
Right
Feedback
LFO Shape
LFO Phase
LFO: Tri / Sine
Wet / Dry
Wet / Dry
High Damp
Stereo In - Stereo Out
AutoFade
LFO Frequency
Wet / Dry
Spread
FB Mode
(Normal/Cross)