Filter
Top Products
112
Using the Registration Buttons
After saving Registrations on USB memory, user memory (p. 218), or floppy
disk, you can change the order or name of the Registrations, or delete a
Registration (p. 110). If you assign the foot switch to “RIGHT + Load Next” (p.
122), you’ll be able to recall Registration sets in the order in which they are
stored in USB memory or user memory. This function is very convenient when
you’re getting ready to perform.
1.
Prepare the Registration(s) that you want to rename or sort.
If you want to rename or sort Registrations saved on USB memory, connect
your USB memory to the External Memory connector.
If you want to rename or sort Registrations saved on a floppy disk, connect
the floppy disk drive to the External Drive connector, and insert the floppy disk
into the floppy disk drive.
2.
Touch <Registration> on the Main screen.
The Registration Load screen appears.
fig.03-05.eps
3.
Touch <File>.
The Registration File Edit screen appears.
fig.03-25.eps
Changing the Name or Order of Registration
You can also open the
Registration Load screen by
pressing the [Registration]
button on the panel.
AT-500_e.book 112 ページ ２００８年７月２８日 月曜日 午後４時１７分