Filter
Top Products
86
Using Rhythm Performance
The ATELIER contains a variety of Rhythms, but you can also use Rhythms from
USB memory or floppy disk to perform Rhythms in an even wider range of
styles.
1.
Press the Rhythm [User] button (confirm that its indicator is lit).
The Rhythm screen appears.
fig.02-21-1.eps
2.
Connect the USB memory containing the Rhythms to the
external memory connector.
3.
Touch < > < > to select “Ext Memory” and see the
Rhythms in USB memory.
The Rhythm screen will show the Rhythms on the USB memory.
fig.02-21.eps
4.
Touch the Rhythm screen to select a Rhythm.
The [Start/Stop] button indicator will blink while the Rhythms are being
loaded into internal memory.When loading is finished, you will be able to
play the selected Rhythm.
5.
Press the [Start/Stop] button.
The selected Rhythm is played.
Using a Rhythm from a USB Memory
Reviewing the Rhythms on USB Memory
NOTE
Unauthorized use of
commercially available Music
Style disk for purposes other
than private, personal
enjoyment is a violation of
applicable laws.
If you copy Rhythms from USB
memory or floppy disk into user
memory (p. 72), you’ll be able
to access those Rhythms simply
by pressing the [User] button
(p. 87).
If you want to use Rhythms from
a floppy disk, connect the
floppy disk drive to the Ext
Drive connector.
If “User” is selected, the
Rhythms saved in User memory
(p. 72) will be shown.
If “Disk” is selected, the
Rhythms saved on the floppy
disk will be shown.
AT-500_e.book 86 ページ ２００８年７月２８日 月曜日 午後４時１７分