Filter
Top Products
65
Selecting and Playing Sounds
Selecting and Playing Sounds
4.
Touch the part display of the part whose Octave Shift
settings you wish to change.
fig.01-30.eps
5.
Touch < > < > to adjust the settings.
The value can be set to a range of +/- 3 octaves.
fig.01-31.eps
6.
Touch <Exit>.
You will return to the Upper Keyboard/Lower Keyboard/Pedalboard screen.
You can open the Pedalboard
screen, Lower Keyboard
screen, or Upper Keyboard
screen with touching <Pedal>,
<Lower>, and <Upper>.
When the power is turned on,
the Octave Shift setting for the
Pedal part will be set to -1 (1
octave down).
NOTE
Please note that when you
apply the Octave Shift function
to certain voices, their pitch
could be stretched beyond their
recommended note ranges, and
they may not sound as
expected. Care should be taken
when using Octave Shift.
AT-500_e.book 65 ページ ２００８年７月２８日 月曜日 午後４時１７分