Filter
Top Products
60
Selecting and Playing Sounds
In addition to sounds such as organ and piano, you can also play “human
voice,” which produces a vocal-like sound.
1.
Press the [Alternate] button for the Part for which you wish
to specify a voice to select ON (lit) or OFF (dark).
The setting of the [Alternate] button: ON (lit) or OFF (dark), determines to
which of the two available locations a newly selected voice will be assigned.
2.
Press the [Others] button for the Part for which you wish to
specify a voice.
The Others Voice screen appears for several seconds.
fig.01-15.eps
3.
Touch a button that shows a sound group.
fig.01-15.eps
A sub-window appears, allowing you to select a sound group.
fig.01-16.eps
Performing with a Human Voice
For details on the Human Voice
that are available, refer to
“Voice List” (Appendix:
separate booklet).
NOTE
When you press the [Others]
button, the Others Voice screen
appears in the display screen,
but the Main screen will
reappear if you wait several
seconds without touching the
screen.
If you want to change the voice
for the [Others] button, press
the [Others] button once more,
then select the voice by quickly
touching the screen while the
Others Voice screen appears in
the display.
AT-500_e.book 60 ページ ２００８年７月２８日 月曜日 午後４時１７分