Filter
Top Products
24
Before You Start Playing
If you’re using headphones or a microphone, you can use the
cord hook to neatly bundle the cables near your feet.
Attaching the Cord Hook
1.
Screw the cord hook (with wing nut) about
80% of the way into the screw hole located at
the bottom left of the organ.
2.
After you’ve oriented the hook as desired, use
the wing nut to fasten it.
You can restore all of the settings stored in the ATELIER to what
they were when the instrument shipped from the factory. This
function is called “Factory Reset.”
1.
Touch <System> on the Main screen.
The System screen appears.
fig.00-37.eps
2.
In the System screen, touch <Utility> to open
the Utility screen.
fig.00-38.eps
3.
In the Utility screen, touch <Factory Reset>.
fig.00-39.eps
Using the Cord Hook
Screw Hole
Wing Nut
Cord Hook
Restoring All the Factory
Default Settings
AT-500_e.book 24 ページ ２００８年７月２８日 月曜日 午後４時１７分