Filter
Top Products
213
Various Other Settings
Various Other Settings
* When the pedal part button is ON, data received at the MIDI In
connector will control the pedal part of keyboard sound
generator. When the pedal part button is OFF, data received at
the MIDI In connector will control the GS sound generator.
4.
Touch <Exit>.
This setting remains stored in memory even while power is
turned off.
When you use the MIDI connectors or the USB connector of
the ATELIER to transmit musical data to external devices, for
each keyboard (Upper, Lower, and Pedal) you can specify the
channel on which your playing will be transmitted as MIDI
messages.
For details refer to “Connecting MIDI Devices” (p. 231).
1.
Touch <System> on the Main screen.
The System screen appears.
fig.09-24.eps
fig.09-30.eps
fig.10-11.eps
2.
Touch the part to change the MIDI Transmit
Channel.
The Control part transmits Expression pedal data and PC
numbers.
3.
Touch < > < > to change the setting.
fig.09-31-a.eps
4.
Touch <Exit>.
MIDI messages for the Solo part will be transmitted only
when the Solo [To Lower] button is ON.
Selecting the MIDI Transmit Channel
Menu
Part
Tx MIDI Ch. Upper
Upper
Tx MIDI Ch. Lower
Lower
Tx MIDI Ch. Pedal
Pedal
Tx MIDI Ch. Solo
Solo
Tx MIDI Ch. Drums
Drums/SFX
Tx MIDI Ch. M.Perc
Manual Percussion
Tx MIDI Ch. Ctrl
Control
Setting
1–16
NOTE
AT-500_e.book 213 ページ ２００８年７月２８日 月曜日 午後４時１７分