Filter
Top Products
57
Appendix
MFX bank B
Number
Type CTRL 1 function (display) CTRL 2 function (display) CTRL 3 function (display)
1
COMP SUSTAIN (SUS) ATTACK (Atk/rEL)
✩
LEVEL (LEV)
✩
Makes the sound more con-
sistent.
Adjusts the depth of the com-
pressor.
Adjusts the attack. If Limit mode
is on (rEL), this adjusts the re-
lease.
Adjusts the volume.
2 EQUALIZER LOW (Lo )
✩
MID (Mid)
✩
HIGH (Hi )
✩
Adjusts the volume of each
frequency region.
Adjusts the low-frequency vol-
ume.
Adjusts the mid-frequency vol-
ume.
Adjusts the high-frequency vol-
ume.
3 C.CANCELER L-R BALANCE (L-r) LOW BOOST (Lo ) HIGH BOOST (Hi )
Cancels the vocal or other
sound located in the center.
Adjusts the point at which maxi-
mum cancellation occurs.
Boosts the low-frequency
sounds located in the center,
such as the bass.
Boosts the high-frequency
sounds.
4 SUBSONIC PITCH (Pit) THRESHOLD (tHr) BALANCE (bAL)
Adds a low-frequency sine
wave based on the volume
being input to the effect (*2).
Adjusts the frequency of the sine
wave.
Adjusts the volume at which the
sine wave will begin sounding.
Adjusts the volume balance be-
tween the direct sound and ef-
fect sound.
5 LO-FI COMP LO-FI TYPE (tyP) PRE FILTER TYPE (FLt)
✩
BALANCE (bAL)
Degrades the audio quality.
A compressor is also provid-
ed.
Adjusts the audio degradation. Selects the type of filter located
before the input to the Lo-Fi ef-
fect.
Adjusts the volume balance be-
tween the direct sound and ef-
fect sound.
6 NOISE GEN WHITE NOISE (WHt) DISC NOISE (diS) HUM NOISE (HUM)
Applies a lo-fi effect, and
also adds noises such as
white noise and record
noise.
Adjusts the volume of the “hiss”
noise.
Adjusts the volume of the “pop”
noise.
Adjusts the volume of the “hum”
noise.
7 RADIO TUNING DETUNE (tUn) NOISE LEVEL (noS) BALANCE (bAL)
Simulates sound heard from
a radio.
Adjusts the tuning drift of the ra-
dio.
Adjusts the volume of noise. Adjusts the volume balance be-
tween the direct sound and ef-
fect sound.
8 VINYL SIM FREQUENCY RANGE (rnG) NOISE LEVEL (noS) WOW/FLUTTER (FLU)
Simulates sound heard from
an analog record.
Adjusts the frequency response
of the playback system.
Adjusts the volume of noise. Adjusts the rotational instability
of the analog record.
9 DIST+PAN DRIVE (drV) TONE (ton) PAN (PAn)
Monaural distortion, with ad-
justable panning.
Adjusts the degree of distortion. Adjusts the panning. Adjusts the panning.
10 OD+PAN DRIVE (drV) TONE (ton) PAN (PAn)
Monaural overdrive, with ad-
justable panning.
Adjusts the degree of distortion. Adjusts the tonal character. Adjusts the panning.
11 AMP SIM AMP TYPE (JC –FUZ) VOLUME (VoL) SPEAKER TYPE (SL1–3St)
Simulates a guitar amp. Selects the type of amp (*3). Adjusts the amp volume and de-
gree of distortion.
Selects the type of speaker (*4).
12 BIT CRASH SAMPLE RATE (rAt) BIT (bit)
✩
FILTER (FLt)
Produces an extreme lo-fi ef-
fect.
Adjusts the sample rate. Adjusts the bit depth. Adjusts the filter depth.
13 STEP FILTER STEP PTN (P01–P16) RATE (t32–t1)*1 RESONANCE (rES)
✩
A filter that varies the cutoff
frequency in a stepwise man-
ner.
Selects the pattern in which the
cutoff frequency will change.*6
Adjusts the length of the STEP
PTN.
Adjusts peak frequency re-
sponse at the cutoff frequency.
14 STEP RING MOD STEP PTN (P01–P16)
✩
RATE (t32–t1)*1 BALANCE (bAL)
A ring modulator that varies
the modulated frequency in a
stepwise manner.
Selects the pattern in which the
modulated frequency will
change.*6
Adjusts the length of the STEP
PTN.
Adjusts the volume balance be-
tween the direct sound and ef-
fect sound.
SP-555_e.book 57 ページ ２００７年６月２５日 月曜日 午前９時９分