Filter
Top Products
64
Appendix
D Beam As-
sign
Off, 1–30
(“oFF”, “ 1”–“ 30”)
[CANCEL] + [V-LINK]
➜
[SYNTH]/[FILTER]/[TRIGGER]
➜
CTRL 3 knob
After making the setting, press [SAMPLING] to save it.
Seq Ach Ctrl
Pad Bank
Off, Bank A–J
(“off”, “b. A”–“b. J”)
[CANCEL] + [V-LINK]
➜
Bank [D/H]
➜
CTRL 3 knob
After making the setting, press [SAMPLING] to save it.
Seq Bch Ctrl
Pad Bank
Off, Bank A–J
(“off”, “b. A”–“b. J”)
[CANCEL] + [V-LINK]
➜
Bank [E/I]
➜
CTRL 3 knob
After making the setting, press [SAMPLING] to save it.
Seq Cch Ctrl
Pad Bank
Off, Bank A–J
(“off”, “b. A”–“b. J”)
[CANCEL] + [V-LINK]
➜
Bank [F/J]
➜
CTRL 3 knob
After making the setting, press [SAMPLING] to save it.
Blinking
speed of the
display illumi-
nation
Off, 1–9, Pattern
(“off”, “ 1”–“ 9”, “Ptn”)
[TAP TEMPO] + Power On
➜
CTRL 3 knob
After making the setting, press [SAMPLING] to save it.
Sample Ex-
port Type
WAV, AIFF
(“WAV”, “AIF”)
[RESAMPLING] + Power On
➜
CTRL 3 knob
Select the format for sample export. After making the
setting, press [SAMPLING] to save it.
Pedal Assign Loop Capture Play/Overdub,
Loop Capture Play/Stop, Seq
Start/Stop, Fixed Velocity, Effect
On/Off
(“LC.1”, “LC.2”, “SEq”, “VEL”,
“EF.S”)
[CANCEL] + press the pedal
➜
CTRL 3 knob
After making the setting, press [SAMPLING] to save it.
For details on each setting, refer to
“About the pedal”
(p. 68).
Error message list
Message
Explanation
EJC(Eject)
Processing is not possible because the memory card was removed.* Don’t remove the card while the pow-
er is on.
EMP(Empty) There is no sample, pattern, or backup data to delete.
There is no backup data to load.
There is no WAV or AIFF to import.
There is no data to export as WAV or AIFF.
Err(Error) Invalid data was found in internal memory, and it was repaired or deleted.
FUL(Memory Full) Processing could not be performed because of insufficient memory.
Prt(Protected) Processing could not be performed because Protect is enabled.
UnS(Unsupported format) Processing was halted because the WAV or AIFF was in a format not supported by the SP-555.
Parameter
Range (display indication) Panel operation Remarks
SP-555_e.book 64 ページ ２００７年６月２５日 月曜日 午前９時９分