Filter
Top Products
59
Appendix
Quick reference of operations
Sampling operations
To accomplish this
Do this
Play a sample
Pad [1]–[16]
Play the external input sound [MIC] /[LINE IN]
Set the volume of the external input MIC LEVEL knob / LINE IN LEVEL knob
Record a sample
[SAMPLING]
➜
Pad [1]–[16]
➜
[SAMPLING] (press [SAMPLING] to stop sampling)
Make auto sampling settings
[CANCEL] + [SAMPLING]
➜
CTRL3 knob
➜
[SAMPLING]
Cancel auto sampling
[CANCEL] + [SAMPLING]
➜
set CTRL3 knob to Min
➜
[SAMPLING]
Set the BPM for sampling
In sampling standby mode, [TIME/BPM]
➜
CTRL2 knob
➜
[TIME/BPM]
➜
Sampling standby
Sample with a count-in
In sampling standby mode [START/END/LEVEL]
➜
[SAMPLING]
Resampling
[RESAMPLE]
➜
CTRL3 knob
➜
[SAMPLING]
➜
Pad [1]–[16]
➜
[SAMPLING]
➜
Pad [1]–[16] (press [SAMPLING] to stop resampling)
Set the volume of a sample
Pad [1]–[16]
➜
[START/END/LEVEL]
➜
CTRL3 knob (press [START/END/LEVEL] to end the setting)
Set the start/end points
Pad [1]–[16]
➜
[MARK]
➜
[MARK]
Set only the start point
Pad [1]–[16]
➜
[MARK]
➜
Pad [1]–[16] (same pad as initial one)
Set only the end point
[MARK] + Pad [1]–[16]
➜
[MARK]
Adjust the start/end point
Pad [1]–[16]
➜
[START/END/LEVEL]
➜
CTRL1 knob (Start) / CTRL2 knob (End)
Cancel the specified start/end points
(with [MARK] lit) Pad [1]–[16]
➜
(during playback) [MARK]
Truncate
Pad [1]–[16]
➜
[DEL]
➜
[MARK]
➜
[DEL]
Specify a sample’s BPM
Pad [1]–[16]
➜
[TIME/BPM]
➜
CTRL2 knob ( [TIME/BPM] ends the setting)
Time Modify setting
Pad [1]–[16]
➜
[TIME/BPM]
➜
CTRL1 knob ( [TIME/BPM] ends the setting)
Exchange samples between pads
[DEL] + [SAMPLING]
➜
Specify the exchange-source pad
➜
Specify the exchange-destina-
tion pad
➜
[SAMPLING]
Copy samples between pads
[DEL] + [RESAMPLE]
➜
specify the copy-source pad
➜
specify the copy-destination pad
➜
[SAMPLING]
Delete an individual sample
[DEL]
➜
Pad [1]–[16]
➜
[DEL]
Delete all samples
[CANCEL] + [DEL]
➜
Bank [A]–[B] (internal)/[C/G]–[F/J] (card)
➜
[DEL]
View remaining sampling time [REMAIN]
View current pad [REMAIN]
Stop all sounding samples Rapidly press [CANCEL] four times
Effect operations
To accomplish this
Do this
Select MFX type (1)
[MFX] + CTRL3 knob
Select MFX type (2)
While holding down [MFX], Bank [A]/[B]
➜
Pad [1]–[16]
Effect grab [EFFECT ASSIGN] + effect button
Specify effect send for a sample [EFFECT ASSIGN] + Pad [1]–[16]
Effect send for Mic or Line In [EFFECT ASSIGN] + [MIC]/[LINE IN]
SP-555_e.book 59 ページ ２００７年６月２５日 月曜日 午前９時９分